Aastra MX-ONE_A700_MS Lync 2010 Quick Setup Guide Uživatelský manuál stáhnout pdf (Strana 18)

18 (19)

5 Integration Notes

Please note that the following scenarios are currently not supported when MX-ONE is integrated with

Lync Server:

• REFER cases:

• OC Client transfers the inbound call to another PSTN phone after answering it when

REFER is enabled

• Result: Originating phone does not hear ring back during the transfer, but once the

PSTN phone answers the call two way voice paths is present

• Solution: Disable REFER

• Outbound Call: Blind transfer to another Client

• Result: Originating phone does not hear ring back during the transfer, but once the

PSTN phone answers the call two way voice paths is present

• Solution: Disable REFER

• Inbound Call: Blind Transfer to PBX user

• Result: Originating phone does not hear ring back during the transfer, but once the

PSTN phone answers the call two way voice paths is present

• Solution: Disable REFER

• Early Media before answer.

• MX-ONE does not support sending DTMF as a part of early media.

6 References

Please always check the latest documentation. The links below are the ones available at the time of

this guide was written.

Aastra CPI Documentation – Aastra MX-ONE V.4.1 SP3 and Aastra 700 V.1.0.4 or later.

Lync Server

Deploying Enterprise Voice

Enable Users for Enterprise Voice

7 Revision History

Document Version Comment Date

Rev. A First issue 2011-10-07

Rev. B Second issue 2011-12-01

1 2 ... 13 14 15 16 17 18 19

Žádné komentáře

Aastra MX-ONE_A700_MS Lync 2010 Quick Setup Guide Uživatelský manuál Strana 18